5 Best Practices to Fix Zsh Command Not Found Error on macOS [Bash and Zsh] (2023)

In 2019, macOS released Catalina, and from then on, Mac switched from bash toZschas the default login shell. Therefore, some Zsh commands may not be available after system upgrade. Users of macOS Catalina or later versions like Big Sur, Monterey and Ventura may get a message likeZsh: Command not foundas we will see below, and other Zsh: command not found errors include Zsh: command not found: brew, Zsh command not found: pip, Zsh: command not found: nvm, or Zsh: command not found: npm. There are several reasons why this error can appear.

The Reasons for Zsh Command Not Found Error on Mac

When using Unix, Linux or macOS, many people encounter this "Zsh command not found" problem. Users continue to search the forums for an answer to this, so we decided to provide all possible solutions to this problem. First of all, "Zsh: command not found" usually has the following reasons:

1. Zsh commands typed incorrectly on MAC

When using Zsh commands on Mac for the first time, users often make mistakes like adding extra symbols or omitting a space where required. The misspelled command is unreadable for macOS. So that would remind you of the command error. If you encounter the zsh command not found issue, please check if the command is correct.

2. The command is valid, but the package is not installed

Users often try to run a command but the required package isn't installed, so they get a "zsh command not found" message. If the command is valid and entered correctly, it is better for users to determine if they have the required package installed.

3. Change the zsh command's default environment settings

from ... tomacOS-UpdatesFor new releases, the typical ordering environment varies where mostFest Linuxsaves commands, but is not suitable for Zsh commands. Because by default, Zsh doesn't read any environment variables from the previously specified address.

How to Fix Zsh Command Not Found Error with 5 Solutions

ÖZsh: Command not foundProblems on a Mac can arise in many different situations. You can receive the message inmacOS Monterreyor any other version of macOS that uses z-Shell.

Before we start the 5 solutions, you can first watch the following video tutorial on the method to fix the problemZsh command not foundMistake.

1. 00:00 - Introduction
2. 00:40 - Check if Terminal is Zsh or Bash
3. 01:08 - Download mysql server for mac
4. 02:51 - Create .z profile
5. 04:15 - Configure path for mysql
6. 05:00 – USA mysql-u root-p

If you still have doubts about how to fix the error, keep reading the solutions below.

1. 1. Check the syntax
2. 2. Make sure the package is installed
3. 3. Define the $Path environment
4. 4. Set the path in the .zshrc file
5. 5. Reinstall macOS

Solution 1. Check the syntax if the Zsh command is not found

If you're using Terminal on Mac and getting a "zsh: command not found" message, the first thing to do is look at the command syntax. It's better to copy and paste the original content into the terminal than to type it in manually. It's also helpful to compare your command to other examples that use the same command.

Solution 2. Make sure Zsh command package is installed

Often you try to run a command, but the required package is not installed. If your command is valid and typed correctly, do you need to verify that the required package is installed? The answer is no. Make sure you don't forget to install the command pack on your Mac if you know the zsh command is not found.

Solution 3. Set $Path Environment to Fix Zsh Command Not Found

to solveZsh: "Command not found" error., the second solution is to check if the "$RUTA"The environment variable is set correctly.

If you installed the package but still get the "zsh: command not found" error, then something is wrong. This indicates that you need to create a PATH variable for your command package.

Here is an example of configuring an export PATH:

Most packages set up the path variable automaticallymacOS upgrade or fresh install🇧🇷 If you are doing a custom install, you may need to manually set the path variables on Linux or macOS.

Solution 4. Set Zsh command path in .zshrc file

If you log out and log back into Terminal after installing the package and setting the path variable, but still get the errorZsh command not found🇧🇷 Set the command path to on.zshrc fileto make it fit.

Your .zshrc file will run and set the command path every time you close and reopen Terminal. Follow these steps to edit the .zshrc file.

Step 1.Open the macOS terminal.

Step 2.Make sure you use zsh shell; if not, writee.gand press Enter to confirm.

Level 3.modelnano /.zshrcin the window.

step 4Now add your $PATH variable information

step 5To save the file, press Ctrl + X, Y and Enter to close the nano editor.

step 6To apply the changes, run the source /.zshrc command now.

Solution 5. Reinstall macOS to Fix Zsh Command Not Found

You may have accidentally deleted files required by Terminal commands when rooting macOS and destroying certain system files or folders. then you shouldRecover deleted files on MacIf that happens

Forreinstall macOSwithout formatting the drive, you can go back to previous settings and fix zsh command not found. Although reinstalling the operating system should not result in data loss, it is recommended that you back up your important files first. If you can't find your important data, try itRecover files after reinstalling macOS.

Additional Info: How to Recover Deleted Data on Mac

As we mentioned in Solution 5, reinstalling macOS can be a useful method to fix Zsh command not found error. Also, recovering deleted files on Mac after reinstallation or upgrade is also crucial.

It would be beneficial if you were vigilant in protecting your data because incorrectly updated processes or incorrect commands can lead to loss of your files and data. Here is an excellent tool for data recovery, specificallyMac Junk Recoveryon your Mac:EaseUS Data Recovery Assistant for Mac.

Check out the steps and learn how to use the software to recover deleted files on your Mac.

Step 1. Select location and scan

Launch EaseUS Mac Data Recovery Wizard and select the drive where you lost data. Then click "Scan for lost files" to start the scan.

Step 2. Filter and preview the lost files

After scanning, use the file format filter on the left or upper-right corner to find the deleted files you need.

Step 3. Recover lost data or files

You can double-click a file to view its contents, or select multiple files to restore them all at once. Click "Recover" to recover lost data to local or cloud drive.

End

Generally, the Zsh Command Not Found issue is caused by differences between Bash shell and Zsh shell. Different versions of macOS may not be fully compatible. If you've just updated your Mac and found your Zsh command has issues, we hope the following solutions can help. Besides, your Mac devices can work effectively to protect your data with EaseUS Data Recovery Wizard for Mac.

Zsh command not found FAQ

Here we have included 4 questions that might also interest you. Try it and find the answers here.

1. Is zsh default on Mac?

After macOS Catalina, zsh is the default on the Mac, but in versions of macOS before Catalina, zsh is not the default command shell on the Mac.

2. How do I start or Zsh not Mac?

Open the Shell tab, click Run Command, and type zsh.

3. How to open Zsh terminal on Mac?

1. Step 1. Click the Launchpad icon in the Mac dock
2. Step 2. Search for "Terminal" in the box.
3. Step 3. Click Terminal.
4. Step 4. Type "Zsh" to launch it.

4. How to fix macOS error "Zsh: command not found brew"?

Make sure Brew is properly installed and the path variable is set correctly.

1. Step 1. Open the .zshrc file using nano /.zshrc command.
2. Step 2. Add the following code to the file: export PATH="$PATH:/opt/homebrew/bin/"
3. Step 3. Save the file with Control + Enter and X.
4. Step 4. To apply the changes, type source /.zshrc in the command line.